Unit RELAY
SKU:U023
Description
RELAY as it says is an M5Unit that implement a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch, where it is necessary to control a large power load circuit by a separate low-power signal such as digital signal output from a microprocessor.
The Relay support input voltage of up to 30V DC and 220V AC.
There are 3 pins named: ON, OFF, COM. You can program to make COM connect to ON or OFF, just by high and low out put of a digital GPIO.
Product Features
- Single-BUS control
- Up to 3A @ 30 V DC or 220 V AC
- Software Development Platform: Arduino, UIFlow (Blockly, Python)
- Two Lego-compatible holes
Include
- 1x RELAY Unit
- 1x Grove Cable
- 1x 3.96 socket
Applications
- Remote control of high-power appliances, such as refrigerators, air conditioners, TVs, etc.
Specification
| Resources | Parameter |
|---|---|
| Single relay power consumption | 5V@40mA |
| Coil operating time | 6ms |
| Coil release time | 4ms |
| Net weight | 12g |
| Gross weight | 26g |
| Product Size | 48*24*21mm |
| Package Size | 60*57*17mm |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Download Windows Version Easyloader Download MacOS Version Easyloader
The relay coil is turned on and off, and the contact is used as a switch for circuit control.
Related Link
PinMap
| M5Core(GROVE B) | GPIO36 | GPIO26 | 5V | GND |
|---|---|---|---|---|
| RELAY Unit | RELAY Controlling Pin | 5V | GND |
Schematic
Example
Arduino
- M5Unit-RELAY - with M5ATOM
- M5Unit-RELAY - with M5CORE
- M5Unit-RELAY - with M5CORE2
- M5Unit-RELAY - with M5STICKC
- M5Unit-RELAY - with M5STICKC-PLUS
UIFlow
Video
Program with UIFlow