SKU:U121-B



PoECAM-W is an open source fully programmable camera integrating PoE (Power Over Ethernet) and Wi-Fi. This item is ESP32 based webcam with W5500 embedded Ethernet controller, plus 2M pixel image sensor OV2640. PoECAM-W is equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, auto image acquisition, etc.
| Resources | Parameters |
|---|---|
| MCU | ESP32-D0WDQ6-V3 |
| Camera Module | OV2640 |
| Ethernet Chip | W5500 |
| FLASH | 16MB |
| PSRAM | 8MB |
| Pixel Size | 2.2 µm x 2.2 µm |
| Automatic image control functions | Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC) |
| Supports Hardwired TCP/IP Protocols | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
| DFOV | 65° |
| Output Formats(8-bit) | YUV(422/420)/YCbCr422, RGB565/555, 8-bit compressed data, 8-/10-bit Raw RGB data |
| Ethernet interface specifications | RJ45 |
| MAXIMUM POWER | 6W |
| Product Size | 64mm × 24mm × 18mm |
| Package Size | 80mm × 37mm × 32mm |
| Product Weight | 38g |
| Package Weight | 45g |






EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification.
Download Windows Version Easyloader
| M5Core(GROVE A) | SCL | SDA | 5V | GND |
|---|---|---|---|---|
| PoECAM-W | GPIO33 | GPIO25 | 5V | GND |
PoECAM-WTo download the program, you need to connect an external ESP32 burner,you can
Click here to buy the M5's official ESP32-Downloader kit, which includes a transfer board for easier connection