pdf-icon

UIFlow Guide

UIFlow 1.0 Quick Start

1. UIFlow Web IDE 1.0

UIFlow 1.0 Blockly

Event

Event

Unit

Unit CO2
Unit CO2L
Unit CardKB
Unit ENV
Unit ToF
Unit ToF4M
UnitV/M5StickV V-Function
Unit RFID2
Unit Ultrasonic
Unit Sonic IO
Unit 8Angle
Unit 2Relay
Unit 4Relay
Unit 8encoder
Unit 8servo
Unit Accel
Unit ACSSR
Unit AC Measure
Unit AC Socket
Unit ADC
Unit ADC V1.1
Unit Ain4 20ma
Unit Ameter
Unit Angle
Unit BLDC Driver
Unit BPS
Unit BPS V1.1
Unit Button
Unit Buzzer
Unit CAN
Unit Catm
Unit Catm GNSS
Unit Color
Unit DAC
Unit DAC2
Unit DCSSR
Unit DDS
Unit Digi Clock
Unit Dlight
Unit Dual Button
Unit Earth
Unit Encoder
Unit Env Pro
Unit Ext Encoder
Unit Ext IO
Unit Ext IO2
Unit Fader
Unit Fan
Unit Finger
Unit Flash Light
Unit Gesture
Unit Glass
Unit Glass2
Unit GPS
Unit Grove2grove
Unit Hall
Unit Hbridge
Unit Heart
Unit Id
Unit IMU
Unit IMU Pro
Unit IR
Unit ISO RS485
Unit Joystick
Unit Key
Unit Kmeter
Unit Kmeter Iso
Unit Laser Rx
Unit Laser Tx
Unit LCD
Unit Light
Unit Limit
Unit LoRaWAN 470
Unit LoRaWAN 868
Unit LoRaWAN 915
Unit LoRa E220
Unit LoRa E220 433
Unit Makey
Unit Microphone
Unit Mini CAN
Unit Mini OLED
Unit Mini Scales
Unit MQTT
Unit NB IoT
Unit NB IoT2
Unit NCIR
Unit NCIR2
Unit Neco
Unit OLED
Unit OP 90 180
Unit Pahub
Unit Pbhub
Unit PIR
Unit PoESP32
Unit QRCode
Unit Reflective IR
Unit Relay
Unit RF433-R
Unit RF433-T
Unit RGB
Unit RGB LED
Unit Roller 485
Unit RS485
Unit RTC
Unit Scales
Unit Servo
Unit SSR
Unit Synth
Unit Thermal
Unit Thermal2
Unit Trace
Unit Tube Pressure
Unit TVOC eCO2
Unit UHF RFID
Unit UWB
Unit Vibrator
Unit Vmeter
Unit Watering
Unit Weight
Unit Weight I2c
Unit Zigbee

Atomic Base

QR-Code2
Blockly Custom

UIFlow 1.0 Project

UIFlow 1.0 File Manger

UIFlow 2.0 Quick Start

1. UIFlow Web IDE 2.0

UIFlow 2.0 Blockly

UIFlow 2.0 API Docs

UIFlow 2.0 Project

Import & Export Project
Device Share
Project Zone
File Manager

M5Burner

M5Burner Install
Firmware Export
Firmware Publish

Desktop IDE

UIFlow 1.x Desktop IDE
1. UIFlow Web IDE 1.0
step_done
2. M5StickCPlus Firmware & Program
step_run

M5StickC-Plus Firmware Burning and Program Pushing

1. Preparation

  • Refer to the UIFlow Web IDE Tutorial to understand the basic workflow of using UIFlow and complete the installation of the M5Burner firmware burning tool.
  • Download the firmware compatible with M5StickC-Plus in M5Burner, as shown in the image below.

2. USB Driver Installation

Connect the device to the PC and open Device Manager to install the FTDI driver . For Windows 10, download the driver matching your operating system, unzip it, and install it through Device Manager. (Note: In some system environments, the driver may need to be installed twice to take effect. Unrecognized devices are usually named M5Stack or USB Serial. It is recommended to install the driver files directly in Device Manager on Windows, as executable file installations might not work properly.) Click here to download the FTDI driver.
For MacOS users, please check System Preferences -> Security & Privacy -> General -> Allow apps downloaded from: -> App Store and identified developers before installation.

3. Port Selection

  1. Connect the device to the computer via USB, select the Burn button for the corresponding firmware in M5Burner, fill in WiFi information, and select the corresponding device port.

4. Firmware Burning

  1. Click the Start button to begin burning. Note: If burning fails or connection times out, check for port occupancy, try updating the USB cable, or lower the baud rate.

5.API KEY

  1. After completing the firmware burning, the device will reboot and maintain the USB connection. Use M5Burner to click the Configure option, select the corresponding port, and click Load to load the current device configuration. Once obtained, a pop-up will display the current device's API KEY, Start Mode, and other information. At this point, we can copy and save the device's API KEY information for later use. Note: In this example, we will use UIFlow Web IDE (online version) for programming, therefore, Start Mode needs to be set to Internet Mode.

  1. After configuring the device to online programming mode, we need to use the API KEY to establish a connection between the device and UIFlow, allowing it to push programs to the specified device. Users need to visit flow.m5stack.com in a web browser on their computer to enter the UIFlow programming page.

  2. Click the settings button in the upper right corner of the page, enter the API KEY we obtained in the previous step, click OK to save, and wait for the connection to succeed.

6.RUN

1.After completing the above steps, you can start programming with UIFlow. The following will show you a simple program to drive M5StickC Plus to display labels. (1. Drag UI controls 2. Add label program .3 Click the run button in the upper right corner)

7. USB Programming Mode

  • Refer to the UIFlow Desktop IDE Tutorial for the installation process of UIFlow Desktop and understand the basic workflow. Follow the operations below to set the device to USB programming mode, or use the Configure option in M5Burner to set Start Mode to USB Mode, and then you can program with UIFlow Desktop IDE.
On This Page