UNit Acssr

Example

from m5stack import *
from m5ui import *
from uiflow import *
import unit

setScreenColor(0x222222)
acssr_0 = unit.get(unit.AC_SSR, unit.PORTA)

def buttonA_wasPressed():
  # global params
  acssr_0.set_i2c_ssr_state(1)
  pass
btnA.wasPressed(buttonA_wasPressed)

def buttonB_wasPressed():
  # global params
  acssr_0.set_i2c_ssr_state(0)
  pass
btnB.wasPressed(buttonB_wasPressed)

def buttonC_wasPressed():
  # global params
  acssr_0.set_i2c_rgb_led(50, 50, 50)
  pass
btnC.wasPressed(buttonC_wasPressed)

acssr_0.init_mode(1)
print((str('FW version:') + str((acssr_0.get_i2c_status(0xFE)))))
while True:
  if acssr_0.get_i2c_ssr_status():
    print('ON')
  else:
    print('OFF')
  wait_ms(2)

API

acssr_0.init_i2c_address(0x50)

• Initializes the I2C communication address of the ACSSR Unit

acssr_0.init_modbus(4, 1, 115200, 8, 1, None)

• Initializes the Modbus communication format

print(acssr_0.get_i2c_rgb_led())

• Get the RGB value through i2c

print(acssr_0.get_i2c_ssr_status())

• Obtain the switching status of the SSR through I2C

print(acssr_0.get_i2c_status(0xFE))

• Obtain the firmware version in I2C mode

print(acssr_0.get_modbus_rgb_led())

• Obtain the RGB value through Modbus communication

print(acssr_0.get_modbus_ssr_status())

• Obtain the switching status of the SSR over Modbus

print(acssr_0.get_modbus_status(0x0001))

• Obtain the firmware version over Modbus

acssr_0.init_mode(1)

• Set the communication mode of the ACSSR Unit, I2C or Modbus

acssr_0.set_i2c_address(0x50)

• Set the i2c address of the ACSSR

acssr_0.set_i2c_rgb_led(50, 50, 50)

• Set the RGB value using i2c

acssr_0.set_i2c_ssr_state(1)

• Set the switch status of the SSR device

acssr_0.set_modbus_address(0x50)

• Set the i2c address of the ACSSR

acssr_0.set_modbus_rgb_led(50, 50, 50)

• Modbus Sets the RGB value of the LED

acssr_0.set_modbus_ssr_state(1)

• Modbus Sets the status switch of the SSR