Module COM.CAT1
SKU:M031-H
Description
COM.CAT1 is an LTE CAT1 data communication module with a built-in SIM-A7680C module for LTE CAT1 in China, it supports LTE-TDD/LTE-FDD wireless communication. The module integrates SMA external antenna interface to stabilize the communication quality and signal of the device. Integrated DC 5/12V power input interface, provide more power supply options. It can be stacked with the same series of M5 stacking modules to extend the functions. In comparison with NBIoT, CAT1 has a stronger data transmission speed. The maximum downlink rate is up to 10Mbps (uplink) / 5Mbps (downlink). This module is ideal for applications that require data transmission rates (remote control/data transit, etc.).
Product Features
- SIM-A7680C
- Suitable for CAT1 band in China
- LTE CAT1 module, supports LTE-TDD/LTE-FDD wireless communication standards
- Max. downlink rate 10Mbps/max. uplink rate 5Mbps
- UART interface/AT command control
- Card slot specification: Nano
- Module interface.
- 1x DC 5/12V POWER INPUT
- SMA antenna interface
- Integrated dip switch in the base, support communication pin switching
- 5x5cm specification, compatible with M5Stack stacking system
- Development platform:
Includes
- 1x COM.CAT1 Module
- 1x SMA antenna
Application
- Remote Control/Data Acquisition
- Cloud application of data
SIM-A7680C Module Certification
- 3C/SRRC/NAL/RoHS/REACH
Specifications
| Specifications | Parameters |
|---|---|
| Communication Module | SIM-A7680C |
| Up and Down Speed | Maximum Downlink Rate 10Mbps / Maximum Uplink Rate 5Mbps |
| Support CAT1 band | LTE-TDD: B34/B38/B39/B40/B41 LTE-FDD: B1/B3/B5/B8 |
| Network Protocol | TCP/IP/IPV4/IPV6/MultiPDP/FTP/HTTP/DNS/RNDIS/ECM/PPP/TLS/LBS/TTS/MQTT/WiFi Scan |
| Communication | UART 115200bps 8N1 |
| SIM card slot specifications | Nano |
| Input Power | MBUS(5V) / DC INPUT (5V/12V) |
| Net Weight | 28.6g |
| Gross Weight | 78.0g |
| Product size | 54.2 * 54.2 * 13.2mm |
| Packing size | 165 * 60 * 36mm |
PinMap
- SIM-A7680C
Adjust the UART DIP switch on the COM.CAT1 module to switch the IO pins used by
TX/RX. Adjust the power input DIP switch to adjust the 5V/12V power input.
| COM.CAT1 | RX | TX |
|---|---|---|
| M5Core | G16/G5/G15 | G17/G0/G13 |
| M5Core2 | G13/G33/G15 | G14/G0/G19 |
According to the different needs of different hosts, the DIP switch fluctuates to the corresponding pin.
| M5Stack HOST | CORES3 | CORE2 | CORE |
|---|---|---|---|
| RXD | 17/0/7 | 14/0/19 | 17/0/13 |
| TXD | 18/1/13 | 13/33/2 | 16/5/15 |
Schematic
Related Link
- Application
- A76XX Series_Audio_Application Note_V1.02.pdf
- A76XX Series_Blue Tooth_Application Note_V1.02.pdf
- A76XX Series_CTBURST_Application Note_V1.00.pdf
- A76XX Series_CTBURST_Application Note_V1.00.pdf
- A76XX Series_FOTA_Application Note_V1.00.pdf
- A76XX Series_FTP(S)_Application Note_V1.02.pdf
- A76XX Series_GNSS_Application Note_V1.02.pdf
- A76XX Series_GNSS_Dynamic_Loading_Instructions_Application Note_V1.00.pdf
- A76XX Series_HTTP(S)_Application Note_V1.02.pdf
- A76XX Series_LBS_Application Note_V1.02.pdf
- A76XX Series_MQTT(S)_Application Note_V1.02.pdf
- A76XX Series_SSL_Application Note_V1.02.pdf
- A76XX Series_Sleep Mode_Application Note_V1.02.pdf
- A76XX Series_TCPIP_Application Note_V1.02.pdf
- A76XX Series_UART_Application Note_V1.02.pdf
- A76XX Series_UIM HOT SWAP_Application Note_V1.02.pdf
- A76XX Series_Cloud Platform Protocol_Application Documentation_V1.01.pdf
- AT Command
Examples
Arduino
- Examples
- Libraries
UIFlow
How to use Module comx_cat1 on the UIFlow 1.0 graphical programming platform and related API instructions.