pdf-icon

ATOM Display Lite

SKU:K115-B

Description

ATOM Display Lite is an all-in-one display driver kit. Use FPGA to simulate traditional SPI TFT-LCD Data output. This kit supports images at a maximum resolution of 1280 x 720 pixels (720P). Built-in LT8618SX RGB to HDMI chip supports wide range HDMI signal output. Integrate 2.4G Wi-Fi, with 4M Flash + 520KB SRAM. So small yet powerful, which can replace the traditional display driving solution.

Note: ATOM Display Lite needs to be paired with monitors with adaptive resolution scaling function.

Comparison

Products MCU Flash RAM IO PINS
ATOM Display Lite ATOM Lite (ESP32-PICO-D4) 4MB 520KB SRAM G22,G19,G23,G33,G26,G32,G25,G21
ATOM Display PSRAM ATOM PSRAM (ESP32-PICO-V3-02) 8MB 520KB SRAM + 2MB PSRAM G22,G19,G5,G33,G26,G32,G25,G21

Product Features

  • All codes of FPGA and driver library are open-source
  • Use FPGA (Gowin GW1NR-9C) to simulate traditional SPI TFT-LCD Data output
  • Built-in LT8618SX RGB to HDMI chip (supports 24bit color depth)
  • SPI interface (FPGA) + I2C interface (LT8618SX)
  • Maximum 720P (1280x720) image output
  • Multiple output modes, optimized frame rate up to 12 ~ 16FPS
  • Built-in ATOM Lite main controller (ESP32-PICO-D4, 4MB Flash + 520KB SRAM)
  • Programmable RGB LED x1, reset button x1, button x1, Grove expansion port x1
  • Development platform: Arduino (UIFlow support coming soon)

Includes

  • 1x ATOM Lite
  • 1x ATOM Display

Application

  • Display input signal source
  • HD Data Board

Specifications

Specification Parameters
ESP32-PICO-D4 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
FPGA Gowin GW1NR-9C
LT8618SX RGB to HDMI chip, support 24bit color depth
Max. image output 720P(1280x720)
Output frame rate 1280x720 60Hz
Net weight 21g
Gross weight 34g
Product Dimensions 64 * 24 * 29mm
Packaging size 76 * 46 * 29mm

Pin Mapping

  • BUTTON & RGB LED
ATOM G39 G27
BUTTON SIGNAL /
RGB LED / SK_DIN
  • LT8618SX
ATOM G25 G21 5V GND
LT8618SX LT_CSDA LT_CSCL VIN GND

Schematics

Structure

Example

Arduino

Click here to see the M5Atom & Arduino tutorial
Before using the examples in the M5GFX library, you need to change the header file to match the device you are currently using. Introduce #include <M5AtomDisplay.h> and create the example M5AtomDisplay display; as shown in the example below;`

#include <Arduino.h>
#include <vector>

#include <M5AtomDisplay.h>
M5AtomDisplay display;

void setup(void)
{
  display.begin();
}

void loop(void)
{
  display.fillScreen(RED);
  delay(1000);
  display.fillScreen(GREEN);
  delay(1000);
  display.fillScreen(BLUE);
  delay(1000);
}